I can speak for the vast majority of people when I say that we like our calm, peaceful toilet time, also known as commode time. Two thousand five hundred persons were polled in a previous survey. According to the survey, most people use their bathroom on average one hour and forty-two minutes weekly. It revealed that we spent the majority of that time on the toilet—2208 hours, or ninety-two days over a lifetime—was spent using the restroom. According to another survey, women completed their business in only eighty-five minutes, while males spent one hour and forty-five minutes every week using the restroom. That demonstrates how important our toilets are to our quality of life. therefore we should take better care of them.
One of the few Easy Toilet Repairs Is to Prevent Your Toilet From Running
Nothing is more annoying than a running toilet, which is also the main factor in excessive water bills. A toilet that runs continually loses up to two hundred gallons of water per day. In addition, a worn-out flapper is the most frequent reason for a toilet to leak. Water spills into the bowl when the flapper no longer maintains a tight seal. The items you need to stop your toilet from running are available at your local home improvement stores, and they won’t set you back more than a few dollars. Replacing the flapper is an easy toilet repair.
You may also determine if your toilet is running by pouring a few drops of food coloring into the tank and waiting fifteen minutes before checking the bowl. You have a leaky toilet if the coloring has entered the toilet bowl. Once more, there is no need to hire a plumber to complete this task.
How To Replace Your Flapper
- At the angle stop (shut-off valve) behind the toilet, turn the water off and flush the toilet.
- Next, disconnect your chain from the flapper and take the flapper off.
- Ask your neighborhood home center employee to match it when you bring it in.
- Afterward, swap it out for the new flapper.
To repair a toilet flapper, you don’t need to be a DIY enthusiast—it’s that simple.
A word of warning: If your toilet hasn’t been turned off for a while, there’s a good probability that the shut-off valve is stuck in place. Forcing it shut might result in a leaking valve causing a completely different set of issues. You might also need to contact your plumber if it is locked in place. As a result, as part of routine house maintenance, you should replace your shut-off valves every eight to ten years. These are easy toilet repairs for your Murrieta Plumber.
Change That Disgusting, Cracked Toilet Seat
The broken or unsteady toilet seat is usually the last thing to be changed because the majority of us are procrastinators. Most modern toilet seats get secured with plastic nuts, as opposed to the metal nut and bolts used on earlier toilets. The nut is simple to replace but may be challenging to remove if rusted. Additionally, if your toilet seat is fastened to the bowl with a metal nut and bolt, your toilet may be outdated and consume too much water. Your toilet has to get replaced if it was built in 1992 or earlier because it uses too much water. Consider swapping it out for a new one that utilizes 1.28 or 1.6 gallons per flush. With all The easy toilet repairs, this is the easiest.
Does Your Toilet Move When You Sit Down?
If you live in an old house, you could encounter a swaying toilet. For instance, the subfloor could have been warped or didn’t get installed correctly. In any event, any movement has the potential to harm the wax seal. So first, look around your toilet for any evidence of dampness; if you find any, you should either replace or refit your toilet ASDAP. Next, if everything appears in order, you may try removing the old caulking from around the toilet, cutting some plastic shims to fit around it, making sure it’s level, and then tightening the bolts until they’re snug. Finally, re-caulk the area surrounding the toilet.
Even better, have a plumbing expert reinstall your toilet. Using a new wax ring when reinstalling your toilet is always preferable. Wax rings have a 25–30 year lifespan. However, if they didn’t initially install the toilet correctly, you can damage the seal. Replacing or reinstalling a toilet is one of the easy toilet repairs.
Get A New Toilet To Start Conserving Water And Money
Our toilets seem like they might last a lifetime. Some experts claim that toilets can survive for more than fifty years if the inners get replaced every few years. But that doesn’t imply we ought to keep them for that long. As previously stated, if the toilet was constructed before 1992, it should be replaced since it consumes too much water. Furthermore, the majority of toilet components are simple to change. Even a beginner do-it-yourselfer can change most toilet parts. The fact that toilet repair components are affordable is what makes it easy to replace them. For less than $25, you can get an entire toilet repair kit.
Thinking About Getting A New Toilet?
Have you given buying a new toilet any thought? You’re squandering a substantial quantity of water if your present model uses more than 3.5 gallons while flushing. By upgrading to a toilet with the WaterSense-approved toilet, you may save up to thirteen thousand gallons of water per year. The Environmental Protection Agency oversees the WaterSense initiative (EPA). A product must be independently verified to fulfill strict performance and efficiency requirements in order to receive the label. Starting at roughly $200, a new toilet that has earned the WaterSense stamp is a great investment.
Big B’s Plumbing Has You Covered For All Your Easy Toilet Repairs
Big B’s Plumbing has you covered if you need to repair or replace your toilet. Our team of plumbing technicians has been installing new toilets in Canyon Lake, Lake Elsinore, Menifee, Murrieta, Temecula, and Northern San Diego for more than a decade. We have a stellar customer care reputation and an A+ rating from the Better Business Bureau. On Yelp, Facebook, and Google My Business, there are over 1000 5-stars reviews.
